Installing Zigbee2MQTT (Home Assistant add-on)
Features
Allows you to use your Zigbee devices without the vendor's bridge/gateway.
Web URL
Setup Steps
1. Install MQTT Broker in the APP store and add MQTT integration in Home Assistant.
2. Install Zigbee2MQTT in APP store. Enter your Zigbee serial device, adapter (ConBee II or CC2652), and MQTT host IP (your Amber IP). Click OK.
3. Pair your devices.
Go to Zigbee2MQTT web and then long-press your Zigbee device’s reset button
to join the network.
4. You will see the device information after it joins the network.
In the Dashboard, you can check the status of the device.
If your device shows as an unsupported device, select delete.
Force remove and Delete. And try to join the network again.
5. Integrate with Home Assistant.
You will see the new devices in the MQTT integration.
You can select and see the status of the device.
In the dashboard, you can edit and ADD CARD.
Select your Zigbee device.
Click ADD TO LOVELACE UI.
Click DONE.
Your Zigbee device card will be added.